Stabik UKM-10000 / 45A
Stabik UKM-10000 is a logical continuation populrnoy model Stabik UKM-10000. Stabilizer Stabik UKN-10000 has a system of continuous control voltage power of 10 kilowatts. The new model features a large number of degrees of protection, the new informative LCD display, the system error display, a larger number of temperature sensors, modern design, this all – new Stabik UKN-10000.
How does the stabilizer:
Inside electromechanical stabilizer body is toroidal transformer, inside which is a reversible electric motor, powered by a voltage of 12 volts, which gives us a built-in step-down transformer. 2 mounted on the transformer assembly brush in which brush are arranged and made cooling radiators, which do not allow the brush assembly to our overheat. Microprocessor control board gives the team and the servo moves the brush assembly on a specially prepared for this place to the number of turns, which is necessary to ensure that the output voltage of 220 volts. So runs the servo, practicing input voltage surges.
What is different from other models:
The big advantage of electromechanical voltage stabilizer to relay or thyristor is a smooth adjustment, minimizing the blinking light, high accuracy of stabilization. Technical terms Stabik UKN-10000 model is characterized by a convenient wall mount, extended system parameters and display network errors, the ability to work in a smooth operation with very low mains voltage (110 volts).
Specifications:
Power output max: ……………………………………………………. 10 kW
Power at a voltage of 180 V: ……………………………………………………… .. 8 kW
Power at a voltage of 160 V: ……………………………………………………… ..7 kW
Power at a voltage of 140 V: 6.5 kW …………………………………………………………
Power at a voltage of 130 V: ……………………………………………………… .. 6kW
Power at a voltage of 120 V: ……………………………………………………… .. 5.5 kW
Power at a voltage of 110 V: ………………………………………………………… 5 kW
A type стабилизатора:…………………………………………………………………………………single phase
A type stabilising:…………………………………………………………………………………. electromechanical
process installation:…………………………………………………………………………………..wall mount
Nominal input voltage: ………………………………………………………. The 140-260
Limiting the input voltage: 110-275 ………………………………………………………… In
Output current:………………………………………………………………………….. 220v
Error stabilising:…………………………………………………………………… 3.5%
Mains frequency: ………………………………………………………………………… .50 Hz
Work mode ………………………………………………………………………………………….. continuous
Distortion sinewave :……………………………………………………………………………. absent
Cooling method: …………………………………………………………………………………air cooling
The maximum load current: A …………………………………………………………………… ..45
Protection against overcurrent overload:………………………………………………………..auto switch
The maximum heating temperature of the autotransformer winding: 95 ° C ……
Stabilization rate …………………………………………………………………………… 15 V / sec.
Availability байпаса:……………………………………………………………………………………… there is
Connection method: ……………………………………………………………………………….terminal block
Working temperature: ………………………………………………………………………………-0°С…+40°С
Class protection:………………………………………………………………………………………….. IP20
efficiency: ………………………………………………………………………………………………………….97%
Dimensions of the box: …………………………………………………………………. 535h395h270 mm.
Dimensions stabilizer: ……………………………………………………… .. 440h300h165 mm.
Gross weight: ………………………………………………………………………………………………..25.3 kg.
Net weight: ………………………………………………………………………………………………….23.92 kg.
warranty :……………………………………………………………………………………. 12 months